No products in the cart.

In the device management view, you can send work commands to the device. Work orders to be sent are made either by a call to the device or sent by SMS:

  • to switch to device tracking mode, press the “Start” button and a phone call to the tracking device number will begin. When the command is understood, the monitoring device interrupts the call.
    NB! Due to technical problems with the operator, the user may also receive the message “Service failed, please try again later”. However, the device starts working.
  • To call the tracker and listen to the dog, press the phone icon and the phone call to the tracking device number will start. The device in answering mode automatically answers the call. The call can be up to 60 seconds long.
  • to switch off the device from monitoring mode, press the “Stop” button and the phone will start sending an SMS to the monitoring device number. The content of the SMS to be sent is “1”.
  • To change the tracking interval of the tracking device, select “Set interval” and enter the desired time in seconds. The sending of an SMS to the number of the tracking device is then initiated. The content of the SMS to be sent is “1” + the tracking interval entered by the user (e.g. for an interval of 15 seconds, an SMS “115” is sent to the device). Sending an interval change command to a device in standby mode also puts the device in monitoring mode. The tracking interval of the tracking device can be between 1-99 seconds. NB! The faster the device, the higher the battery consumption of the device.

Interesting posts